@ -7,14 +7,17 @@ A Hexapod Robot using Raspberry Pi Zero W
## Introduction
This is a hexapod robot based on [Smallp Tsai](https://github.com/SmallpTsai)'s [hexapod-v2-7697](https://github.com/SmallpTsai/hexapod-v2-7697) project.
This project reused most of the mechanism designs in the original project, but with a totally redesign on the circuits and softwares.
* **Remote control** is done via `BLE` of `Linkit 7697`
* It has 6 legs, each leg has 3 joints. So there are total `18`**Servo motors** (TowerPro `MG92B`)
* Linkt 7697 dont have so many **PWM control**, so NXP `PCA9685` x 2 are used to control these servo motors
* **Power** comes from a `2S Lipo battery (7.4v)`. Also 7 x `mini360 DC-DC` step down voltage regulator are used. One to provide `5V` to Linkit 7697, The other six to provide `6V` to each legs (1 mini360 serve 3 servo)
* The **body** is 3D printed PLA. I use `Prusa i3 MK2S`, a really good 3D printer.
* Everything (3D STL, PCB schematic, 7697 source code) are included in the project under **GPL license**, Happy making!
This project reused most of the mechanism design in the original project, but with a totally redesign on the circuits and softwares.
The table below shows the difference between this project and the original one.
Zhengyu Peng
2 years ago
committed by
GitHub