51 lines
2.2 KiB
Markdown
51 lines
2.2 KiB
Markdown
# Bill of Materials
|
|
|
|
## Servo - MG92B
|
|
|
|
Servo is the key component. I use TowerPro [MG92B](http://www.towerpro.com.tw/product/mg92b/). It has metal gear (important!).
|
|
An hexapod requires 18 of them.
|
|
|
|
> The dimension of 3d printed part is highly depended on servo's dimension.<br>
|
|
> Modification is required if you want to use other alternative servo.
|
|
|
|
> TowerPro MG92B can be found on Ebay seller [servohorns959](https://www.ebay.com/usr/servohorns959), which is listed on TowerPro official website ([Link] (http://www.towerpro.com.tw/about-us-2/)). <br>I also got mime servo from him.
|
|
|
|
|
|
## 3D-Printed Parts
|
|
|
|
### Body x 1
|
|
|
|
Filename | Thumbnail | Required |
|
|
-------- | --------- | -------- |
|
|
body_top |  | 1 |
|
|
body_bottom |  | 1 |
|
|
body_center |  | 1 |
|
|
body_side_wall |  | 2 |
|
|
body_back_wall |  | 1 |
|
|
|
|
### Leg x 6
|
|
|
|
Filename | Thumbnail | Required |
|
|
-------- | --------- | -------- |
|
|
thigh_top |  | 1 (x6) |
|
|
thigh_bottom |  | 1 (x6) |
|
|
joint_cross |  | 1 (x6) |
|
|
joint_top |  | 2 (x6) |
|
|
joint_bottom |  | 2 (x6) |
|
|
leg_top |  | 1 (x6) |
|
|
let_bottom |  | 1 (x6) |
|
|
foot_top |  | 1 (x6) |
|
|
foot_bottom |  | 1 (x6) |
|
|
foot_ground |  | 1 (x6) |
|
|
foot_tip |  | 1 (x6) |
|
|
|
|
## Others
|
|
|
|
Name | Spec | Thumbnail | Required | Note
|
|
---- | ---- | --------- | -------- | ----
|
|
Screw | M2 6mm |  | 54 | Servo Arm: 1 x 18<br>Joint: 4 x 6<br>Thigh: 2 x 6
|
|
Screw | M2 12 or 10mm |  | 6 | Thigh: 1 x 6<br>12mm is better<br>(10 is also ok if 12 is hard to find)
|
|
Screw | M2 30mm |  | 36 | Servo: 2 x 18
|
|
Nuts | M2 |  | 36 | Servo: 2 x 18
|
|
Pin (304) | M4 6mm |  | 18 | Servo: 1 x 18
|