You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2.4 KiB
2.4 KiB
Bill of Materials
Servo - MG92B
Servo is the key component. I use TowerPro MG92B. It has metal gear (important!). An hexapod requires 18 of them.
The dimension of 3d printed part is highly depended on servo's dimension.
Modification is required if you want to use other alternative servo.
TowerPro MG92B can be found on Ebay seller servohorns959, which is listed on TowerPro official website ([Link] (http://www.towerpro.com.tw/about-us-2/)).
I also got mime servo from him.
3D-Printed Parts
Body x 1
| Filename | Thumbnail | Required |
|---|---|---|
| body_top |  |
1 |
| body_bottom |  |
1 |
| body_center |  |
1 |
| body_side_wall |  |
2 |
| body_back_wall |  |
1 |
Leg x 6
| Filename | Thumbnail | Required |
|---|---|---|
| thigh_top |  |
1 (x6) |
| thigh_bottom |  |
1 (x6) |
| joint_cross |  |
1 (x6) |
| joint_top |  |
2 (x6) |
| joint_bottom |  |
2 (x6) |
| leg_top |  |
1 (x6) |
| let_bottom |  |
1 (x6) |
| foot_top |  |
1 (x6) |
| foot_bottom |  |
1 (x6) |
| foot_ground |  |
1 (x6) |
| foot_tip |  |
1 (x6) |
Tools
| Filename | Thumbnail | Required |
|---|---|---|
| tools_mount |  |
1 |
Others
| Name | Spec | Thumbnail | Required | Note |
|---|---|---|---|---|
| Screw | M2 6mm |  |
54 | Servo Arm: 1 x 18 Joint: 4 x 6 Thigh: 2 x 6 |
| Screw | M2 12 or 10mm |  |
6 | Thigh: 1 x 6 12mm is better (10 is also ok if 12 is hard to find) |
| Screw | M2 30mm |  |
36 | Servo: 2 x 18 |
| Nuts | M2 |  |
36 | Servo: 2 x 18 |
| Bearing | 8x4x3 mm |  |
18 | Servo: 1 x 18 |
| Cooper/Aluminum Tube | 6 (height) x 4 (dia.) |  |
18 | Servo: 1 x 18 |