You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

174 lines
8.1 KiB
Markdown

3 years ago
# <img src="./imgs/hexapod-logo.svg" alt="logo" width="64"/> Hexapod
3 years ago
3 years ago
A Hexapod Robot using Raspberry Pi Zero W
6 years ago
3 years ago
![banner](imgs/banner.jpg)
3 years ago
3 years ago
## Introduction
6 years ago
3 years ago
This is a hexapod robot based on [Smallp Tsai](https://github.com/SmallpTsai)'s [hexapod-v2-7697](https://github.com/SmallpTsai/hexapod-v2-7697) project.
3 years ago
This project reused most of the mechanical design in the original project, but with a full redesign of the circuits and software.
3 years ago
The table below shows the difference between this project and the original one.
| | Original hexapod-v2-7697 | This project |
| --------------- | ------------------------ | ----------------------------------------------- |
| Controller | Linkit 7697 | Raspberry Pi Zero W or Raspberry Pi Zero W 2 |
| PWM control | Custom circuit board | 2 x PCA9685 motor driver boards |
| DC-DC | 7 x mini360 modules | 2 x XL4005 5A Max DC-DC modules and 1 x mini360 |
| Power | 2S Lipo battery | 2 x 18650 batteries |
| Remote | BLE | WiFi |
3 years ago
| Remote software | Android and iOS | PC, Android |
6 years ago
3 years ago
https://user-images.githubusercontent.com/471808/148647807-02e3e901-6181-4473-8ac4-3b5998fa8d17.mp4
3 years ago
3 years ago
## Mechanism
6 years ago
3 years ago
### Bill of Materials (BOM)
#### Servos
18 TowerPro [MG92B](http://www.towerpro.com.tw/product/mg92b/) are required.
> The dimension of 3d printed part is highly dependent on the servo's size. Modification is required if you want to use alternative servos.
#### 3D-Printed Parts
##### Body x 1
| Filename | Thumbnail | Required |
| -------------- | ----------------------------------------------------------------------- | -------- |
| body_top | <img src="./imgs/body_top.jpg" alt="body_top" width="300"/> | 1 |
| body_bottom | <img src="./imgs/body_bottom.jpg" alt="body_bottom" width="300"/> | 1 |
| body_side_wall | <img src="./imgs/body_side_wall.jpg" alt="body_side_wall" width="300"/> | 2 |
| body_back_wall | <img src="./imgs/body_back_wall.jpg" alt="body_back_wall" width="300"/> | 1 |
| battery_box | <img src="./imgs/battery_box.jpg" alt="battery_box" width="300"/> | 1 |
| battery_holder | <img src="./imgs/battery_holder.jpg" alt="battery_holder" width="300"/> | 2 |
##### Leg x 6
| Filename | Thumbnail | Required |
| --------------- | ------------------------------------------------------------------------- | -------- |
| thigh_top | <img src="./imgs/thigh_top.jpg" alt="thigh_top" width="300"/> | 1 (x6) |
| thigh_bottom | <img src="./imgs/thigh_bottom.jpg" alt="thigh_bottom" width="300"/> | 1 (x6) |
| joint_cross | <img src="./imgs/joint_cross.jpg" alt="joint_cross" width="300"/> | 1 (x6) |
| joint_top | <img src="./imgs/joint_top.jpg" alt="joint_top" width="300"/> | 2 (x6) |
| joint_bottom | <img src="./imgs/joint_bottom.jpg" alt="joint_bottom" width="300"/> | 2 (x6) |
| leg_top | <img src="./imgs/leg_top.jpg" alt="leg_top" width="300"/> | 1 (x6) |
| let_bottom | <img src="./imgs/leg_bottom.jpg" alt="leg_bottom" width="300"/> | 1 (x6) |
| foot_top | <img src="./imgs/foot_top.jpg" alt="foot_top" width="300"/> | 1 (x6) |
| foot_bottom | <img src="./imgs/foot_bottom.jpg" alt="foot_bottom" width="300"/> | 1 (x6) |
| foot_ground | <img src="./imgs/foot_ground.jpg" alt="foot_ground" width="300"/> | 1 (x6) |
| foot_tip | <img src="./imgs/foot_tip.jpg" alt="foot_tip" width="300"/> | 1 (x6) |
| servo_horn_j1j2 | <img src="./imgs/servo_horn_j1j2.jpg" alt="servo_horn_j1j2" width="300"/> | 2 (x6) |
| servo_horn_j3 | <img src="./imgs/servo_horn_j3.jpg" alt="servo_horn_j3" width="300"/> | 1 (x6) |
#### Others
| Name | Spec | Thumbnail | Required | Note |
| --------- | ------- | ---------------------------- | -------- | ------------------------------------------------- |
| Screw | M2 6mm | ![6mm](imgs/M2_6mm.JPG) | 54 | Servo Arm: 1 x 18<br>Joint: 4 x 6<br>Thigh: 2 x 6 |
| Screw | M2 10mm | ![10mm](imgs/M2_10mm.JPG) | 24 | Thigh: 1 x 6<br>Pin lock: 1 x 18 |
| Screw | M2 30mm | ![30mm](imgs/M2_30mm.JPG) | 36 | Servo: 2 x 18 |
| Nuts | M2 | ![6mm](imgs/M2_nut.JPG) | 36 | Servo: 2 x 18 |
| Pin (304) | M4 6mm | ![pin](imgs/pin_M4_6mm.JPG) | 18 | Servo: 1 x 18 |
### Leg Assemble
#### Assembly video
<a href='https://youtu.be/oaAE5fC09KQ'><img src='http://img.youtube.com/vi/oaAE5fC09KQ/mqdefault.jpg'/></a>
#### Exploded view
<img src="./imgs/mech_leg_exploded.jpg" alt="LegAssemble" width="500"/>
#### Detailed steps
- **Step 1** - Combine `thigh_top`, `MG92B` and `thigh_bottom`, use M2x30mm screw and nut to secure them together.
<img src="./imgs/mech_leg_1.jpg" alt="LegAssemble1" width="500"/>
- **Step 2** - Grab one `joint_cross`, `joint_top` and `joint_bottom` and combine them
<img src="./imgs/mech_leg_2.jpg" alt="LegAssemble2" width="500"/>
- **Step 3** - First put 2 x `MG92B`, `leg_top` and `leg_bottom` together with M2x30mm screw and nut. Then attach `joint_top` and `joint_bottom` altogether
<img src="./imgs/mech_leg_3.jpg" alt="LegAssemble3" width="500"/>
- **Step 4** - Grab `foot_top`, `foot_bottom` and `foot_ground` (and `foot_top`) and assemble them.
<img src="./imgs/mech_leg_4.jpg" alt="LegAssemble4" width="500"/>
- **Finish** - Great, you got 1 leg done, 5 more to go :)
<img src="./imgs/mech_leg_5.jpg" alt="LegAssemble5" width="500"/>
## Electronics
### Bill of Materials (BOM)
3 years ago
| Name | Thumbnail | Required |
| -------------------------- | ---------------------------------------------------------------------- | -------- |
3 years ago
| Raspberry Pi Zero W or W 2 | <img src="./imgs/zero2-close-up.webp" alt="raspberry pi" width="300"/> | 1 |
| PCA9685 motor driver | <img src="./imgs/PCA9685.jpg" alt="PCA9685" width="300"/> | 2 |
| XL4005 DC-DC step down | <img src="./imgs/XL4005.jpg" alt="XL4005" width="300"/> | 2 |
| Mini 360 DC-DC step down | <img src="./imgs/mini360.jpg" alt="mini360" width="300"/> | 1 |
| Toggle switch | <img src="./imgs/toggle_switch.jpg" alt="toggle_switch" width="300"/> | 1 |
### Connection Diagram
<img src="./imgs/diagram.svg" alt="diagram" width="800"/>
## Software
3 years ago
### Raspberry Pi
#### Requirements
Raspberry Pi is running [`Raspberry Pi OS`](https://www.raspberrypi.com/software/).
3 years ago
- Enable `I2C` through `raspi-config`
3 years ago
``` bash
3 years ago
sudo raspi-config
3 years ago
```
- Install required packages
``` bash
3 years ago
sudo apt-get install python3-numpy python3-pip
3 years ago
```
- Install required Python modules
``` bash
3 years ago
pip3 install adafruit-circuitpython-servokit
3 years ago
```
3 years ago
> Tips: It is convenient to debug code on Raspberry Pi through VSCode's remote feature.
3 years ago
#### Running
3 years ago
The hexapod program, located under `./software/raspberry pi/`, is written in Python. Use the following command to start it manually.
3 years ago
``` bash
3 years ago
python3 hexapod.py
3 years ago
```
3 years ago
### PC
3 years ago
PC program source files are located under `./software/pc/`. The compiled program can be downloaded under the [release](https://github.com/rookiepeng/hexapod/releases) page.
3 years ago
<img src="./imgs/pc_interface.jpg" alt="pc_interface" width="400"/>
- Find the correct IP address of the Raspberry Pi on the hexapod
3 years ago
- Connect to the hexapod using the IP address
3 years ago
- Use the buttons on the panel to control the hexapod
3 years ago
### Android
3 years ago
<img src="./imgs/screenshot_connect.png" alt="screenshot_connect" width="300"/>
3 years ago
<img src="./imgs/screenshot_control.png" alt="screenshot_control" width="600"/>